Rad & Ally tray

While refitting the rad, I decided to do the ally under tray. This was easy jacked the front up high, sat it on the highest point on the axle stands and gave me enough room to get in and mark up and drill.
Not fitted the oil cooler yet, need to get a small oil filter before I fit it properly.

I was going to post up how I worked out the hole for the gear stick in the tunnel, but I think I'll let someone else explain how to do it correctly!
Lets just say, I wont use the same method for the roll hoops! :D
Luckily it needed opening out a bit to clear the range of gears.