Clutch slave

As room is tight in there and having a setup that isn't common, I had to get a special mounting plate made up. GD were incredibly helpful and remembered roughly what was needed. So I took some measurements they wanted, trial fitted a plate they roughly made (to my rough measurements). I offered things up, and sent it back for finalising which meant they made some spacers and bent the plate so that the slave part leans onto the block to eliminate any flex.

Painted and fitted.
Just need another pushrod. The one GD gave me originally, was spot on. Thinking it needed to be a different length I went about cutting it 10mm shorter, only then to realise that it is at its correct length when pushed all the way in.
Made Andy chuckle.