Keep hold of the cut outs!
If you want to add a mesh behind the holes at a later date, you can use them to bend the mesh around. ;)
Tuesday 15 May 2007
Front vent holes
The 3 oval holes at the front for oil cooler and brake vents were cut out with a Dremel. Cutting this way makes the cut edge facing in towards the body and well hidden.
Keep hold of the cut outs!
If you want to add a mesh behind the holes at a later date, you can use them to bend the mesh around. ;)
Keep hold of the cut outs!
If you want to add a mesh behind the holes at a later date, you can use them to bend the mesh around. ;)
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment